Diluted Ethanol Vapor Condenser

Diluted Ethanol Vapor Condenser in Chemical Plant

SH WAVE Welded Plate Heat Exchanger Works as a Diluted Ethanol Vapor Condenser in Chemical Plant

DETAIL

Original Application Data Sheet for SH Wave- Welded Plate and Frame Heat Exchanger

		SIDE A	SIDE B
FLUID		Diluted Ethanol	Water

FLOW RATE	Kg/h	618.0	30000.0
INLET TEMPERATURE	deg.C	80.0	30.0
OUTLET TEMPERATURE	deg.C	40.0	36.0
DENSITY	Kg/ m³	828/0.998	994.65
SPECIFIC HEAT	Kj/(kg.K)	3.5/1.7	4.176
THERMAL CONDUCTIVITY	W/(m.K)	0.19/0.02	0.62
VISCOSITY	cP	0.74/0.01	0.752
PRESSURE DROP	KPa	1.89	19.6

Plate Material: 0.8mm AISI 316L Plate
Frame Material: SA516

Actually, This Welded Plate and Frame Heat Exchanger is condenser for Diluted Ethanol Vapor, the inlet Diluted Ethanol is Vapor phase which contain composition gas could corrode the Rubble Gasket.
So Shineheat collect the Full Welded Plate and Frame Heat Exchanger which could avoid rubber gasket corrosion, furthermore, it could more reliable for Vapor Sealing.

The Design Drawing for Welded Plate and Frame Heat Exchanger

At Site, new plate heat exchanger installed and operated very successfully, the delivery time is Sept 2017, up to now it is running on good condition and performance.